| |
| Stainless Steel Wire Mesh & Wire Cloth |
Wire Materials: SUS302, 304, 316, 304L, 316L.
Typical Weaving Patterns: Plain Weave, Twill Weave, Dutch Plain Weave and Dutch Twilled Weave. |
|
Stainless Steel Wire Mesh Plain Weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter. Plain woven wire cloth in brass and other metals is also available. |
Plain Weave: |
Stainless Steel Wire Mesh and Wire Cloth Twill Weave can be used to allow a heavier than standard wire diameters. Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. Twill woven wire cloth in brass and other metals is also available. |
Twill Weave: |
Dutch Twill Woven Stainless Steel Wire Cloth: |
Dutch Twill Woven Wire Cloth offers higher strength than regular Dutch woven wire cloth. It packs even more wires in a given area than Dutch plain woven wire cloth. Generally, Dutch Twill Woven Wire Cloth offers finer mesh counts and lower flow than other Dutch Woven Wire Cloth and can be made to filter particles as fine as 2 microns in diameter. Available in stainless steel, alloy, brass and other metals. |
Stainless Steel Wire Mesh Features and Applications:
|
Stainless steel wire mesh, with its excellent resistance against acid, alkali, heat and corrosion, find extensive uses in processing of oils, chemicals, food, pharmaceuticals, also sorting and screening of solid, liquid and gas in mine, metallurgy, airspace, machine making and other fields. |
Technical References for Your Better Understanding of Woven Wire Mesh and Wire Cloth:
Wire mesh and wire cloth can be formed in a variety of opening sizes and wire diameters. The open area is called mesh count or mesh per linear inch and is the critical information needed when ordering wire cloth.
Aperture refers to the open area between the parallel wires.
Mesh Count refers to the number of openings per linear inch. |
 |
|
Measuring Wire Mesh and Wire Cloth:
Mesh count can be shown as either a whole number, fraction, or as two numbers unless the material is a specialty cloth called space cloth - each item is described below:
Whole Number or Fraction
Mesh Count is identified as the distance from center to center of the parallel wires horizontally and vertically.
Space Cloth
This material is measured by the actual open space between parallel wires, known as clear opening, space size, or open area.
Two Numbers (Example: 2 x 2 )
Mesh Count is identified by the number of actual openings per linear inch horizontally and vertically. |
|
| |
| Stainless Steel Wire Mesh and Wire Cloth, Plain Weave |
Mesh |
Wire Dia. (MM) |
Opening (MM) |
Material (AISI) |
7meshx7mesh |
1.00 |
2.63 |
304 or316 |
10meshx10mesh |
0.60 |
1.94 |
304 or316 |
12meshx12mesh |
0.50 |
1.62 |
304 or316 |
16meshx16mesh |
0.40 |
1.19 |
304 or316 |
16meshx16mesh |
0.35 |
1.24 |
304 or316 |
18meshx18mesh |
0.35 |
1.06 |
304 or316 |
20meshx20mesh |
0.40 |
0.87 |
304 or316 |
24meshx24mesh |
0.26 |
0.80 |
304 or316 |
30meshx30mesh |
0.30 |
0.55 |
304 or316 |
35meshx35mesh |
0.17 |
0.56 |
304 or316 |
40meshx40mesh |
0.23 |
0.40 |
304 or316 |
50meshx50mesh |
0.20 |
0.31 |
304 or316 |
60meshx60mesh |
0.15 |
0.27 |
304 or316 |
70meshx70mesh |
0.12 |
0.24 |
304 or316 |
80meshx80mesh |
0.13 |
0.19 |
304 or316 |
90meshx90mesh |
0.12 |
0.16 |
304 or316 |
100meshx100mesh |
0.10 |
0.15 |
304 or316 |
120meshx120mesh |
0.09 |
0.12 |
304 or316 |
150meshx150mesh |
0.063 |
0.11 |
304 or316 |
180meshx180mesh |
0.053 |
0.09 |
304 or316 |
200meshx200mesh |
0.053 |
0.07 |
304 or316 |
Stainless Steel Wire Mesh and Wire Cloth, Twill Weave |
Mesh |
Wire Dia. (MM) |
Opening (MM) |
Material (AISI) |
250meshx250mesh |
0.040 |
0.063 |
316 |
300meshx300mesh |
0.040 |
0.044 |
316 |
325meshx325mesh |
0.035 |
0.043 |
316L |
350meshx350mesh |
0.030 |
0.042 |
316L |
400meshx400mesh |
0.030 |
0.033 |
316L |
450meshx450mesh |
0.028 |
0.028 |
316L |
500meshx500mesh |
0.025 |
0.026 |
316L |
Stainless Steel Wire Cloth, Dutch Weave |
Mesh |
Wire Dia. (MM) |
Material (AISI) |
12mesh x 64mesh |
0.58 x 0.40 |
304 or 316 |
24mesh x 110mesh |
0.36 x 0.25 |
304 or 316 |
14mesh x 88mesh |
0.50 x 0.33 |
304 or 316 |
30mesh x 150mesh |
0.23 x 0.18 |
304 or 316 |
40mesh x 200mesh |
0.18 x 0.13 |
304 or 316 |
50mesh x 250mesh |
0.14 x 0.11 |
304 or 316 |
80mesh x 700mesh |
0.10 x 0.08 |
304 or 316 |
165mesh x 800mesh |
0.071 x 0.040 |
304 or 316 |
165mesh x 1400mesh |
0.06 x 0.04 |
304 or 316 |
200mesh x 1800mesh |
0.05 x 0.032 |
304 or 316 |
825mesh x 2300mesh |
0.035 x 0.025 |
316L |
400mesh x 2800mesh |
0.030 x 0.02 |
316L |
|
Wire Mesh:
